After installation, your technician usually leaves the WiFi ready to use. If you need to reconnect or change settings, follow this guide.
What you need
- Your AIO ONU / ONT (fiber unit)
- A WiFi router (provided or your own)
- An Ethernet cable
- A phone or laptop to configure WiFi
Basic cabling
- Connect the fiber drop to the ONU (technician-installed).
- Run Ethernet from the ONU LAN port to the router WAN/Internet port.
- Power on the ONU first, then the router.
Set your WiFi name and password
Open the router admin page (often printed on a sticker under the router). Change the SSID to something you recognize and set a strong WPA2/WPA3 password. Avoid sharing the default password printed on the device.
Connect your devices
Join the new network on phones, TVs, and laptops. If a device still shows the old network, “forget” that network and reconnect.
Need coverage confirmation or a reinstall visit? Check coverage or contact us.